PRODUCTS:

Overview - CFSLIP Product Line

CFSLIP product family is the new next generation product line which is targeting
the growing demands for data transmission over microwave radio.
As a result the primary traffic interface for CFSLIP radio is Fast Ethernet. In
addition, CFSLIP is capable to deliver up to 4E1 interfaces for legacy connectivity
or any other use. As CFSLIP is capable to provide up to 108Mbps of bit rate to all
interfaces combined, it is a perfect addition to DTS BROADCAST portfolio. This
product family provides perfect solution for a user looking for higher than PDH
E3 capacity without need for STM-1 capacity. The excellent CFSLIP radio and
modem performance allows achieving perfect system capacity by employing 32-
level modulation scheme by user's choice. Apart from the full system capacity of 108Mbps, it is possible to configure theradio to any of 7 MHz, 14 MHz and 28MHz channel bandwidths as well as to any of QPSK, 16APSK and 32APSK modulations, thus providing various capacities to suit particular needs.

DTS Broadcast has employed most modern design solutions and components to
create high performance compact radio with low power consumption - 19-25W
per radio, thus we have a capability to feed the unit by using PoE (Power over
Ethernet). CFSLIP is a perfect building block for any modern future proof wireless network,
including mobile service providers, fixed data service operators, enterprise
customers, municipal and governmental networks among others.

CFSLIP 108Mbps Full Outdoor Unit

Highlights & Benefits of CFSLIP:
Excellent system gain allows efficiently upgrade PDH radios to 108Mbps
capacity avoiding the antenna size change;
Low power consumption enables Power over Ethernet operation and use
of solar/wind power;
ACM (Adaptive Coding and Modulation) and ATPC (Automatic Transmit
Power Control) for high availability and high density deployments;
Very high flexibility allow to configure the system to various channel
bandwidth, modulation scheme and capacity;
SNMP support for remote network monitoring and management.

CFSLIP Full Outdoor system with Optical Gigabit Ethernet
Interface

Highlights & Benefits of CFSLIP:

Most up-to-date technology with up to 256QAM modulation and 56MHz
channel bandwidth allows high capacity throughput up to 366 Mbps;
Optical Ethernet connections provide excellent protection against lightning
strikes and allow long distances from user equipment to radio;
2 Gigabit Ethernet ports provide simple (management and user traffics on
separate ports) and advanced configuration (various network protection schemes
and topologies);
Up to 4093 concurrent VLAN traffic allows building many port-to-port
networks paths for specific client services;
Jumbo frame size supports up to 9728 bytes, which allows using longer header
info (VLAN, MPLS) and transmitting more useful content and less headers, thus
gaining on total throughput.

CFSLIP - TDM / IP split mount system

Highlights & Benefits of CFSLIP :

High capacity system with up to 20 E1 channels and up to 366 Mbps
Gigabit Ethernet is ideal for building hybrid networks to faciliate transition from
TDM traffic to Ethernet only;
Industrial grade fanless design increases reliability and enables low power
consumption;
Excellent upgrade for existing PDH split mount systems;
Most up-to-date technology utilizing 256QAM modulation and 56MHz
channel bandwidth allows high capacity throughput up to 366 Mbps;
Up to 4093 concurrent VLAN traffic allows building many port-to-port
networks paths for specific client services;
Jumbo frame size supports 9728 bytes, which allows using longer header info
(VLAN, MPLS) and transmitting more useful content and less headers, thus
gaining on total throughput.

ACCESSORIES
Big range of accessories are available.







Overview - CFQSL Product Line

DTS Broadcast CFQSL is a safe and affordable wireless communications pointto-
point system. CFQSL digital radios provide high capacity (up to 1200 Mbps)
transmission, flexibility, features and convenience for wireless communications
networks.
CFQSL series digital point-to-point radios represent a new microwave radio
product line that is designed to address universal applications for both PDH and
SDH platforms. This advanced technology platform is designed to provide
flexibility to customers currently and in the future.
CFQSL family is composed of an Indoor Unit (SD-IDU) and Outdoor Unit (ODU).
Indoor Unit is designed to be frequency independent but ODU - capacity
independent.
CFQSL-SD-IDU is based upon a common platform to support wide range of
network interfaces and configurations, including from 2xE1 to 63xE1, Fast
Ethernet, Gigabit Ethernet, 1 or 2 STM-1, SFP and combination of these
interfaces.
Any CFQSL IDU is a modular multiplexer component for DTS Broadcast CFQSL
microwave radio link system featuring modular design. For CFQSL-SD-IDU:
modem module, power supply module, management module and traffic modules.
As well CFQSL-SD-IDU allows selection for multiple capacity options, modulation
types, radio frequency channels and transmit output power levels to
accommodate and adhere to world-wide regulatory and spectral efficiency
requirements. The companion ODU, mounted outdoors, can support frequency
bands: 6, 7, 8, 10, 11, 13, 15, 18, 23, 26 and 38 GHz.
CFQSL-SD-IDU supports 1+0, 2+0 and hitless switching for HSB or SD/FD 1+1
protection, as well as ring architectures in a single 1U chassis. 3+0 and 4+0
configurations can be implemented with use of an additional SD-IDU unit.
The radio family is spectrum and data rate scalable, enabling service providers or
organizations to employ appropriate system gain with spectral efficiency and
channel availability for optimal network connectivity. The radio enables network
operators (mobile and private), government and access service providers to offer
a portfolio of secure, scalable wireless applications for data, video and voice.
The equipment includes integrated Operations, Administration. Maintenance and
Provisioning (OAM&P) functionality and design features enabling simple
commissioning when the radio network is initially set up in the field at the
customer's premises

Radio Units (ODU)
CFQSL digital radios provide high capacity (up to 155/310(WB) Mbps)
transmission, flexibility, features and convenience for wireless communications
11 networks.
CFQSL series digital point-to-point radios represent a new microwave radio
product line that is designed to adress universal applications for both PDH and
SDH platforms. This advanced technology platform is designed to provide
flexibility to customers currently and in the future.
CFQSL Outdoor Unit (ODU) is designed to be capacity independent. The ODU
can support frequency bands from 6 to 38 GHz.


Key characteristics
Frequency bands: 5, 7, 8, 10, 11, 13, 15, 18, 23, 26, 32, 38 GHz
Data rate: Up to 155/310(WB) Mbps
Channel Spacing: 7/14/28 MHz and 14/28/40/56 MHz (WB)
Modulation: QPSK, 16/32/64/128-QAM
Main Features
Excellent reliability
Perfect modularity
Wide range of data and voice interfaces
Outstanding technical parameters for radio and data traffic interfaces
Attractive pricing
Compact and handy design
Low power consumption
User friendly management system


INDOOR UNITS (IDU)
SD-IDU Base Configuration
Basic configuration includes:
Power supply module
Management board (2 Ethernet ports, 1 Serial/Alarm port and 1 USB port
(for future use))
Interface board (2x10/100BaseT Ethernet ports, 1xVOW, 1xAUX, 16xE1
(2xRJ-45 and 1x60-pin Molex LFH connector))
IF Modem.

INTERFACE MODULES
MASTER MODULES
GigE Master IO module with 2E1+4Ethernet
Enhanced GigE IO module with 2E1+4Ethernet
Master IO module with 42E1
Standard IO module with 16E1+2Ethernet
Enhanced IO module with 16E1+2Ethernet
EXPANSION MODULES
STM-1 Optical Mini IO module
STM-1 Electrical Mini IO module
16E1 Expansion IO module
Expansion IO module with 21E1
2xSTM-1 SFP E module
CONTROLLER MODULES
2xSTM-1 SFP E module
MODEMS
Modem/IF module
WB Modem/IF module
POWER SUPPLIES
Power Supply module

ACCESSORIES
Big range of accessories is available.



Overview - CFMSL product line
The widespread and growing use of microwave radio equipment in modern voice
and data networks well deserves to be called a phenomenon of the last decade
of the 20th century and beginning of the 21th century. The reasons behind that
are numerous, like: increased demand for high data rate channels,
growing pressure on operators to shorten the deployment times,
the need to shorten time of the return on investments,
Changing demands for the services from the customers.
All of these issues are well solved using our wireless system CFMSL.
DTS Broadcast CFMSL is a safe and affordable wireless communications point-topoint
system operating over 5, 7, 8, 10, 11, 13, 15, 18, 23, 26, 32 or 38 GHz
frequency bands. It provides voice and data transmission in both urban and rural
areas covering up to 60 km distance between two sites. CFMSL is available with
4, 8, 16 and 34 Mbps data transmission rate. According to the needs of your
business, you may find it handy to use either CFMSL system's modular
equipment - radio (ODU) and interface block (IDU) installed separately - or Full
Outdoor Units (FODU) comprising IDU and ODU in one device. By choosing
CFMSL family products with appropriate interface you can build transmission
systems for voice (nxE1 or E3), data (Ethernet or V.35), as well as mixed
solutions for voice and data combination (E1, Ethernet or V.35). The CFMSL-MMUX
is a modular multi-rate software configurable Indoor Unit operating at
8/16/34Mbps rates. It can be equipped with E1, V.35 and 10/100Base-T Ethernet
interface modules. DTS Broadcast’s CFMSL-MP-MUX is a solution for 1+1
protected HSB/SD/FD installations. Its modular design allows installing various
traffic interfaces that operate at 8-34Mbps (software configurable).
CFMSL Full Outdoor Units have ultra compact "all in one" design comprising IDU
and ODU units in one device. The system is initially designed to provide 4 or 8
Mbps of traffic capacity implemented as 2xE1 or 4xE1 (G.703) channels. Full
Outdoor equipment is perfect for mobile operators and users who do not require
equipment located indoors. The last item in CFMSL Full Outdoor series is 34
Mbps Ethernet Full Outdoor Unit equipped with 10/100 Ethernet Port and
software configurable 2xE1 interfaces. Available capacity combinations are
30+2+2; 32+2; 34 Mbps.
DTS Broadcast CFMSL supports the following link configurations:
Non protected (1+0)
Protected Hot Standby (1+1)
Protected Hot Standby Space Diversity (1+1)
Protected Frequency Diversity (1+1)<
14

OUTDOOR UNITS
CFMSL LM Microwave Radio
LM Universal Radio Unit is designed for operation at fixed bit rates of 8, 16
or 34 Mbps and is operating over 7, 8, 13, 15, 18, 23, 26, 32 and 38 GHz
frequency bands.
The radio is characterized by ease of installation thanks to radio lightweight and
compact design, it provides many features making it a perfect building block for
any network:
full bandwidth coverage with the single radio in 5, 7, 8, 10, 11, 13, 15, 18,
23, 26, 32 and 38 GHz (600MHz);
Wide tuning range of Tx signal level (from -10 dBm to +27 dBm) making
the radio suitable for short, midrange and long link installations;
Wide choice of Indoor Units offering fine tuned combinations of capacity
and interface combinations for specific applications. IDUs are providing E1, V.35
and 10, 10/100 Ethernet ports;
convenient and efficient management system provided through multiple
interfaces of the Indoor Unit, LCD display/keypad, RS-232 terminal port, Ethernet
port Radio is offered with comprehensive choice of adapted antennas - Lens-Horn -
25 cm, and parabolic - 30, 60, 120, 180, 240 and 300 cm. All antennas provide
capability to mount the radio directly on antenna without any accessories. The
change of radio capacity is performed via easy and convienent change of
capacity/interface specific Indoor Units.

INDOOR UNITS
8/16/34 Mbps 1+1
CFMSL-MP-MUX is a solution providing 1+1 HSB/SD/FD protection switching for
CFMSL radio installations. It is a software configurable four-slot indoor unit (IDU)
supporting 8/16/34Mbps rates and operating over all commercially-used
frequency bands. CFMSL-MP-MUX comprises a number of significant features:



1+1 IDU can be complemented with 5 interface modules, including 10/100Base-
T Ethernet Bridge module (single-port or two-port), 1xE1 module, 4xE1 module,
V.35 module. The typical 1+1 link installation consists of two CFMSL-MP-MUX
units, 4 LM Outdoor Units (ODU) and IDU-ODU interconnection cables.
The 1+1 Protection Switch IDU can be equipped with alarm port implemented on
DB-25 connector and providing 4 programmable alarm outputs and 4 user
inputs. The alarm outputs notify radio-related problems and power failures.


FULL OUTDOOR UNITS
34 Mbps Eth Full Outdoor Unit
34 Mbps Ethernet Full Outdoor Unit (FODU) have ultra compact "all in one"
design comprising IDU and ODU units in one device. The system is designed to
provide 34 Mbps of traffic capacity and supports two types of interfaces -
10/100Base-T Ethernet (30-34 Mbps) + up to 2xE1 software configurable
interface.
Combination of Indoor and Outdoor Units' functionality in a single device makes
CFMSL FODU very compact and convenient to use. there are two setup options
for installing the FODU radio system in the network:

1) Directly by connecting the 18-pin cable directly from FODU to the user's
equipment and splitting twisted pairs into E1, management 10Base-T Ethernet,
power and alarm signals;
2) Through the passive patch panel. The panel converts balanced E1 signal
coming from FODU to unbalanced, providing both, balanced 75Ohm E1 port with
BNC connector and unbalanced 120Ohm port with RJ-45 socket.
DTS Broadcast FODU can be connected to any DC power source with voltage
from 20 to 60V (survival 68V). 8 Mbps FODU require CAT 3 or better 8-pair
twisted cable (TP) to interconnect the unit with terminal equipment and
additional 4-pair CAT 5 or better UTP cable.





INTERFACE MODULES
Single-port 10/100Base-T Ethernet module
2-port 10/100Base-T Ethernet module
V.35 module
E3 module
4-port E1 module
Single E1 G.703 module

ACCESSORIES
Big range of accessories are available.

CFOLSL (License free)
DTS Broadcast brings seamless 5 GHz point-to-point connectivity with the release
of the CFOLSL-05-23 and CFOLSL-05-N radio systems. These products feature a
powerful 27dBm RF engine coupled with an integrated 23dBi panel antenna in
CFOLSL-05-23 and an external N-connector for custom antenna application in
CFOLSL-05-N, enabling carrier-class point-to-point operation in the 5 GHz
spectrum.

Antennas
DTS Broadcast offers parabolic antennas (produced by Arkivator- Sweden).
Parabolic antennas are available with diameter 30, 60, 120, 180, 240 and 300cm.
All commercially used frequency bands are covered. To select an appropriate
antenna according to climatic zone and many other parameters, we offer a pointto-
point radio link calculation tool (path-calculator). All antennas are fully
integrated with radio units manufactured by DTS Broadcast. We also offer
accessories for antennas if installed separately from radios.

Network Management System (NMS)
DTS Broadcast’s radio systems are equipped with embedded Element
Management System (EMS) comprising WEB & Telnet servers, command
interface interpreter engine and SNMP agent. Using this integrated quality
toolset, DTS Broadcast equipment can be easily configured and monitored locally
and remotely in convenient and user-friendly manner.
Management application directly manages DTS Broadcast equipment, performs
status polls, checks network topology alterations, carries out SNMP trap Manager
functions, sends requests to and receives respond packets directly from DTS
Broadcast equipment, stores the collected data in the database.
To enhance management functionality further, DTS Broadcast is offering SNMP
and TCP/IP based Network Management System (NMS).
DTS Broadcast NMS provides the following functionality:
Configuration and management of DTS network elements – Indoor and
Outdoor Units;
Actual network status;
Real-time updates on MACs (moves, adds and changes);
Online events and fault notification (customizable log file);
Easy-to-use graphical user interface (GUI).




DTS NMS Essential Features
Maps out network for you, detects and displays network topology in userfriendly
graphical form. Each symbol in the map represents specific unit.
Changing colors indicate faults that are sorted by severity;
Collects information about any DTS network elements within the network
and creates log of alarms and events;
Correlates collected information to quickly determine the source of
discrepancies;
Maintains a relational database from which data can be exported for
historical analysis;
Provides access to customizable report generation based on statistical
information gathered within user-defined period of time;
Provides the possibility to archive outdated events. The user can set time
and frequency of archiving procedure, and define event expiration settings;
Offers a user-friendly graphical interface for management of DTS
equipment.
DTS NMS periodically polls network elements, gathering data regarding the
current status of radiolink equipment:
Unit status (for example, - up, down, or marginal);
Unit configuration changes; 19 Equipment parameters (e.g., Rx level, IDU or ODU temperature, etc.). It is possible to configure thresholds for network elements’ parameters (for example, IDU temperature, Rx level, ODU temperature). DTS NMS generates
alarms and notifies you in case one or more parameters reach critical level.
DTS NMS system involves the following mandatory components:
Database Server (default MySQL) The database stores information about
DTS equipment configuration, alarms, events, actual network status, network
topology users and other gathered values. DTS Management Server The server directly manages DTS equipment, performs status polls, checks network topology alterations, carries out SNMP trap Manager functions, sends requests to and receives respond packets directly from DTS equipment, stores the collected data in the database.
In addition, DTS NMS functionality can be enhanced by optional components:
Web Server (default Apache) Web Server provides remote access to the
Database Server by the means of any web browser (i.e. MS Internet Explorer);
DTS NMS remote console(s) Remote console(s) offers client connection to
Database Server and management of any DTS equipment (software is included
in NMS package); Web Browser Web Browser provides a read-only access to network map
and represents actual system status;

Recommended minimum system for DTS NMS server/client application
and Database Server are as follows:
PC Pentium III or higher
256 Mb RAM
Network card (100 Mbit recommended)
1 GB free hard disk space
Color monitor, min resolution 1024x768
Sound card (for sound alarms)
Windows XP or Windows 2000 Operating System